Earth stove bv4000c manual

If the part number in the manual does not show in the search on. Once you identify your stove model, here is a link to the This brochure lists the Earth Stove brand Wood burning Freestanding stoves and fireplace inserts at around We supply parts for these and all of their stoves found our on web site as well as informative videos, chimney pipe and instructions and much more.

The specifications for these stoves are listed on the last page below. You may find these photos and specifications very helpful in identifying stove models and learning their installation clearances. You can also find for each of these models on our web site. You can find the for these stoves on our web site too.

You will find all the parts you need listed on our web site by using the process of identifying your stove, downloading your parts list and Contact us by email at Info WoodHeatStoves. Once you identify your stove model, here is a link to the Here is an old Earth Stove wood burning insert. We don't have brochures or specifications. Can anyone confirm this stove ID? The blower system can be operated manually or set to oper- ate automatically so the blowers will turn on when the insert is hot and turn off when the insert is cool.

When operating the fireplace insert on low for beyond its normal travel. Just open the bypass, set the We recommend that you ventilate the house during the primary air control to high, open the door approximately initial burns.

Burning materials other than natural wood will shorten enclose space for one to two months. The primary air control is closed.

Soft wood does not burn as long or as well as seasoned 2. The chimney is too cool. Set the primary air con- hardwood resulting in a short burn time. Never burn the appliance with the fuel door open or Other symptoms may include: Cracking, warping or ajar, the ash dump cover off or the ash drawer open if burning out of components, catalytic combustor may optional ash drawer is installed.

Print page 1 Print document 28 pages. Rename the bookmark. Delete bookmark? Cancel Delete. Table Of Contents. Quick Links. Table of Contents. Previous Page. Next Page. Troubleshooting Troubleshooting 20 Troubleshooting For your safety, follow the installation, op- eration and maintenance instructions exactly without deviation.

Failure to follow these instructions may result in a possible fire hazard and will void the warranty. If this appliance is not properly installed, a house fire may result. If the floor protection is to be stone, tile, brick, etc. Factory built fireplace: If any portion of the chimney system shows signs of structural or mechanical weak- nesses, such as: cracks, leaky joints, corroded or warped surfaces.

To install the Catalytic Temperature Probe locate the plug on the top, right-hand side of the bypass control rod. Remove all ashes from the fireplace. Remove all materials inside the insert and set them aside. Remove the three-piece surround assembly face shield and attach insulation material provided using a nonflam- mable adhesive i.